服務熱線
13530851851
產品型號：廠商性質：代理商更新時間：2025-12-14訪 問 量：2780深圳市深東金儀器有限公司 0755- 33217630 ; 33217631
Aim-TTi QL564P 可編程直流電源
Aim-TTi QL564P 可編程直流電源
QL564P直流電源|英國TTi電源|QL564P電源的主要介紹：
*的直流電源，單路或三路輸出
每個輸出高達 112 瓦
非常高的精度、非常低的噪音、出色的動態
帶有數字和旋轉控制的高級用戶界面
多個電壓/電流范圍提高靈活性
用于電源設置的多個非易失性存儲器
可切換遠程感應提供的負載調節
全面保護，包括 OVP 和 OCP 跳閘
工作臺占地面積緊湊；用于機架安裝的模塊化寬度
輔助輸出在 3A 電流下可變 1.00V 至 6.00V，具有可選擇的電壓和電流計量（T 型號）
通過 USB、RS232、GPIB 或 LAN（P 型號）進行總線編程
LAN 接口符合 LXI 標準
后部有重復的電源和感應端子（P 型號）
Single 0-56V/0-4A USB/RS232/GPIB * 單輸出
| True Linear Regulation with Precision Control |
The QL Series II is the latest and highest performance linear regulated power supply series from TTi. Single and triple output models are available. Each model can be specified with or without digital remote control interfaces. Each main output provides more than 100 watts of power, and dual range capability offers higher currents at lower voltages. New features include an enhanced auxiliary output with fully variable voltage and higher current capability on T models, and an LXI compliant LAN interface on all P models. |
QL564P直流電源|英國TTi電源|QL564P電源的主要介紹：
| ||
To meet the varying needs of todays engineers, a comprehensive array of interfaces is provided. RS-232, USB, GPIB and LAN （Ethernet） with LXI support are provided as standard. Each of the digital bus interfaces provides full control of voltage, current, and output on/off, plus read-back of voltage, current and status. The interfaces are opto-isolated from the output. |
| Rear Terminals |
Power and sense terminals are duplicated on the rear panel for rack mount applications and other situations where rear connection is more convenient. |
| Command Set and IVI Driver |
The basic command set for the QL-P Series II is compatible with both the original QL-P series, the PL-P series and other TTi power supplies such as the CPX-P series. An IVI driver for Windows is supplied. This provides support for common applications such as LabView*, LabWindows* and HP-VEE*. |
| RS-232 |
An RS-232/RS-423 interface is provided for use with legacy systems. This type of serial interface remains in common useage and is perfectly satisfactory for the control of power supplies because data speed is not an issue. |
| USB |
USB provides a simple and convenient means of connection to a PC and is particularly appropriate for small system use. A USB driver is provided suitable for Windows* systems. |
| GPIB |
The GPIB interface conforms with IEEE-488.1 and IEEE-488.2. GPIB remains the most widely used interface in larger system applications. |
| LAN-Ethernet with LXI |
The LAN interface uses a standard 10/100 base-T Ethernet hardware connection with ICMP and TCP/IP Protocol for connection to a Local Area Network or direct connection to a single PC. This interface supports LXI and is the most appropriate for larger system use because of its scalable nature. LXI Compliance The LAN interface is compliant with LXI-C. LXI is the next-generation, LAN-based modular architecture standard for automated test systems managed by the LXI Consortium, and is expected to become the successor to GPIB in many systems. |
The triple output models have two identical outputs which are both independent and isolated. Illuminated keys selects which output is to be adjusted and provide unambiguous indication. In situations where the user wishes to set similar voltages or currents on both outputs, 搇inked?mode is available. When linked, all adjustments are applied to both outputs simultaneously. Linked mode can provide tracking outputs and is particularly useful when the user wishes to wire the outputs in series or parallel to obtain higher voltages or currents. A 揷opy? function allows all of the settings of one output to be duplicated on the other prior to linking. For even greater flexibility, the outputs can be linked when set to different voltages or currents allowing separate settings to be loaded into the linked-mode memories for simultaneous recall. |
| Comprehensive output control - synchronous On/Off |
Each output has its own illuminated dc on/off key providing compley independent control. For situations where power needs to be connected or disconnected from all three outputs together, master on/off keys are also provided. Synchronous switching of supply rails is increasingly important when working with circuits which will not tolerate one supply rail being present alone. |
深圳市深東金儀器有限公司早在1996年香港成立香港東金電子有限公司，在2006年10月28在深圳成立深圳市福田區華強廣場東金電子儀器經營部，從事電子儀器行業20年，我們以銷售電子測量儀器儀表為主要業務，為客戶提供較早型、高品質的測試儀器。并以合理的價格、完善的售前及售后服務，使客戶得到平等、互惠的對待。我司的銷售人員擁有多年從事儀器行業銷售的工作經驗，能為您們提供專業的意見和分析，我們擁有豐富維修經驗豐富的工程師為您們提供技術支持與技術培訓;可以更快捷地幫客戶解決測試方面的問題。同時我公司也系統集成方案的供應商，曾為多家大型上市公司設計中央系統集成方案也很好地解決了客戶長期解決不了的生產測試難題，也更節省了生產的成本；也在行業中樹立了良好的口碑。
深圳市深東金儀器有限公司主營：數字/模擬電視中央信號源、CMMB信號源/發生器/發生卡、電視信號發生器、示波器、音視頻分析儀、安規測試儀、EMC測試儀、LCR測試儀、GPS信號發生器，HDMI高清信號源，彩色分析儀，DMB-TH/DVB-T/ATSC/ISDB調制器與功率放大器、示波器電源等儀器；
主營的品牌有：美國泰克(Tektronix)、美國力科（LeCory）、美國安捷倫(是德)（KEYSIGHT)、德國偉視（WISI）、日本橫河（Yokogawa）、中國臺灣固緯（GWinstek）、日本菊水（KIKUSUI）、日本營電（EIDEN）、日本LEVEAR,
日本菊水KIUSUI、英國Aim-tti、Pico Technology英國比克科技 等；同時我公司還有自主品牌寶碼（Pro-instrument）是我司穩步發展的動力.
我們秉承“顧客至上，銳意進取"的經營理念，堅持“客戶*"的原則為廣大客戶提供優質的服務和更好的測試方案，客戶的滿意就是我們前進的較大動力。所以在互聯網發展迅猛的今天，我司在立足深圳，放眼世界，將我們的品牌服務做強做大，為客戶更好地服務。您的滿意就是我們前進的較大動力。
深圳市深東金儀器有限公司歡迎咨詢33217630 33217631
